Table of Contents
Advertisement
Windows Media Encoder Multicast -- Slot1
Click here to play
multicast
Select Multicast
Video Rate
Select Multicast
Audio Rate
Closed Caption
and Metadata
Multicast URL
Transmit
Multicast
destination IP
Address
Destination Port
Time To Live
Type Of Service
Join Own Multicast Some network equipment requires that a Multicast source (such as a
Maximum Packet
Size
Estimated Total Bit
Rate
36
Click to trigger Windows Media Player to initiate streaming via
multicast. Right-click and select
send to others for viewing. This is a good way to view the stream when
adjusting various encoder parameters via the IWS.
Select from the configured video rates or choose None to multicast
audio only. Default = Video Rate1.
Select from the configured audio rates or choose None to multicast
video only. Default = Audio Rate1.
Controls whether or not script data is included in the multicast. Script
data includes
Closed Caption
on what is enabled on the video configuration page.
Use this URL in a player or browser (or on a web page with an
embedded player) to view the stream via multicast.
Controls whether the encoded video and audio is to be transmitted to
the network via multicast.
This is the destination IP Address of the encoded video. By default the
IP Address is set to 127.0.0.1 (the localhost address) which disables
multicast transmission. The multicast address must be a Class D IP
address.
Sets the UDP video destination port.
The number of hops (between routers) for which an IP packet is valid
on the network.
The TOS (Type of Service) can be configured in the IP header to
establish packet priority in the network.
VBrick encoder) join its own Multicast group. This feature is enabled
by default and has no adverse affect on equipment that is fully
Multicast-compliant.
The Windows Media packet size is automatically set to the smallest
possible value based on various parameter settings. The audio
and
(see Audio Template Settings) are the primary
Sample Frequency
factors controlling packet size. Lower audio Bit Rates and Sample
Frequencies will generally result in smaller packet sizes. If you change
this setting, click
Refresh
Reports the calculated estimated maximum bit rate for the multicast
stream including network overhead. Click
settings. It may take a few moments before new values are displayed.
to save the .asx and
Save Target As
data and/or user
Meta Data
to see the re-calculated packet size.
Refresh
© 2008 VBrick Systems, Inc.
depending
Bit Rate
when you change
Advertisement
Table of Contents
