Programming Wr7 Using Pre-Programmed Codes; Quick Set-Up Method - Universal CONTROL WR7 Owner's Manual

WR7 1/13/08 12:18 PM
Programming WR7 using
Pre-Programmed Codes
There are three ways you can program your WR7 using the
component brand codes that are pre-programmed into the remote.

• Quick Set-Up Method

• Three-Digit Code Entry Method
• Auto--Search Method
The Quick Set-Up Method is a unique new feature that enables
the fastest and easiest set-up by using one-digit codes for up to
10 major brands for each component. The Three-digit Code Entry
Method allows you to set-up the WR7 using 3-digit codes for com-
ponent brand names. It is also a fast and easy way to program
the remote. The Auto-Search Method scans through all the brands
in the remote control, one at a time. It should be used when either
the Quick Set-Up or Three-Digit Code Entry Methods do not work.
Quick Set--Up Method
STEP 1: Manually or using your old remote, turn on the
component you want to program—for example, to program your
TV, turn on your TV set.
STEP 2: Point the WR7 toward the component that you want to
program (in this case the TV set) and press and hold the compo-
nent button (in this case the TV button). While holding down
the component button, begin to press numeric keys, one
number at a time, starting from 1, continuing to 2, 3...0 until the
component (in this case the TV) turns off.
Page 9
* * *
Page 9