Aux Function: Programming A 7Th Component; Finding A Component's Set-Up; Code Number - Universal CONTROL WR7 Owner's Manual

WR7 1/13/08 12:18 PM Page 19
AUX Function: Programming
a 7th Component
After you've finished programming the WR7 for six primary com-
ponents and you did not use AUX, you can take advantage of the
AUX function to program a 7th component, such as a second TV,
DVD, or any other audio/video component that you may have in
your system. Simply program the [AUX] button in the same manner
as any other component using either the Quick Set-Up Method,
the 3-Digit Code Entry Method, the Auto-Search Method or the
Learning Method.

Finding a Component's Set-up

Code Number

If you used the Auto--Search or Learning Methods to program a
component, you may not know the code number you programmed.
Here is a way for you to identify what that code number is, so you
can make a note in the back of this Manual for future reference.
STEP 1: Press the component button you would like to verify and
the SELECT [SEL] button at the same time for two seconds until the
selected component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step
while you are in programming mode. If you do not press a button
within 30 seconds, the component LED light will turn off.
The remote will exit the programming mode and you will have
to start over.
COMPONENT
BUTTONS
INFO
SELECT
Page 19