WR7
1/13/08
12:18 PM
Here are some additional facts regarding the
Learning process:
• Learned functions override any existing pre-programmed
functions on the remote control
• Learned functions are automatically erased when a new
function is learned on the same button
• Learned functions are retained even after a different set-up
code number is programmed into the remote control
• To return to an original pre-programmed function, a learned
function must be erased
• Rapidly tapping the Volume Up button on the old remote will
teach the WR7 to ramp the volume instead of raising it in
increments of one
Page 18
Page 18