Universal CONTROL WR7 Owner's Manual page 13

WR7 1/13/08 12:18 PM Page 13
STEP 7: Once you've entered a correct code, you must
save it. Press the component button you just programmed
(in this case TV) one more time to save the code number.
The component LED light will blink three times to confirm that
the code was successfully stored. Now when you press the TV
component button, all of the buttons will work with your TV.
Program the remaining components by repeating steps 3
through 7.
IMPORTANT: If you have tried all the set-up codes in the list
and the component still did not turn off after Step 5, either the
Auto-Search Method (page 14) or the Learning Method (page 16)
will help you program.
Page 13