WR7
1/13/08
12:18 PM
Erasing SimpleSound & Other 'Punch Through'
Commands
STEP 1: Press and hold the Component button you want to
erase volume control from, such as DVD or VCR and the SELECT
[SEL] button at the same time for two seconds until the Component
LED light turns on.
STEP 2: Press the VOLUME UP [VOL
component button from Step 1. The component LED light will
blink three times to confirm the erasure.
VOLUME
UP
Repeat Steps 1--2 to erase SimpleSound commands from
other components.
NOTE: To erase other 'punch through' commands, simply press
the following buttons in place of VOLUME UP in Step 2:
• For Channel Control, press: CHANNEL UP [CH
• For Transport Control, press: PLAY [
• For OSD Control, press: [MENU]
Page 33
] button and the same
]
Page 33
COMPONENT
BUTTONS
SELECT
]