Simplesound Total System Volume Control - Universal CONTROL WR7 Owner's Manual

WR7 1/13/08 12:18 PM Page 25
SimpleSound Total System Volume Control
™
SimpleSound is one of the most exciting features of the WR7.
It gives you total volume control over ALL the components in
your system, even those that do not have built--in volume control,
such as TIVO, DVD and VCR. SimpleSound saves you the hassle
and inconvenience of constantly switching between component
modes just to control volume.
First you should identify which device in your system will be used
to deliver sound. In a basic system, the sound may come from
your TV speaker. In a more advanced system, the sound may
come from your audio components (such as a Surround Sound
Receiver or Home Theatre system).
Now, let's set--up SimpleSound. Here's how:
STEP 1: Press and hold the button that corresponds to the
Component you want to add volume control to (such as a DVD or
VCR) and the SELECT (SEL) button at the same time for about three
seconds until the component LED light turns on.
IMPORTANT: You have 30 seconds to perform the next step
while you are in programming mode. If you do not press a
button within 30 seconds, the component LED light will turn off.
The remote will exit the programming mode and you will have
to start over.
COMPONENT
BUTTONS
SELECT
Page 25