Universal CONTROL WR7 Owner's Manual page 26

WR7 1/13/08 12:18 PM Page 26
STEP 2: Press the VOLUME UP [VOL ] button and then press
either the TV or AUDIO component button that you want to use for
volume. The Component LED light will blink three times to confirm
that it is saved. This sets up three buttons (Volume Up, Volume
Down and MUTE) as a group for that component.
VOLUME
UP
Repeat Steps 1-2 for all other components.
Note: SimpleSound is what's technically referred to as a
"Punch Through" feature and is not limited to volume control.
It can also be applied to other groups of buttons. If you find
yourself switching to a particular component mode frequently
to access a particular control, consider using Punch Through.
Page 26