Configure Guarding Vision - HIKVISION DeepinMind Series User Manual

1.5.2 Configure Guarding Vision

Guarding Vision enables the mobile phone application and the service platform page
(dev.guardingvision.com) to access and manage your connected NVR, providing a convenient
remote access to the surveillance system.
Steps
1. Go to System → Network → Advanced → Platform Access .
2. Check Enable to activate the function. Then the service terms will pop up.
1) Enter Verification Code.
2) Scan the QR code to read the service terms and privacy statement.
3) Check The Guarding Vision service will require internet access. Please read Service Terms
and Privacy Statement before enabling the service if you agree with the service terms and
privacy statement.
4) Click OK.
Note
• Guarding Vision is disabled by default.
• The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is
case sensitive.
3. Optional: Configure following parameters.
• Check Custom and enter Server Address as your desire.
• Check Enable Stream Encryption, then verification code is required for remote access and live
view.
4. Bind your device with a Guarding Vision account.
1) Use a smart phone to scan the QR code on the device to download Guarding Vision.
2) Use Guarding Vision to scan the device QR, and bind the device.
Note
If the device is already bound with an account, you can click Unbind to unbind with the
current account.
5. Click Apply.
What to do next
You can access and manage your video recorder through Guarding Vision app or .
Network Video Recorder User Manual
15