Intrusion Detection - HIKVISION DeepinMind Series User Manual

11. Set linkage actions. Refer to Configure Linkage Actions .
12. Click Apply.

6.4.2 Intrusion Detection

The Intrusion detection function detects people, vehicles or other objects that enter and loiter in a
pre-defined virtual region. Specific actions can be taken when an alarm is triggered.
Steps
1. Go to Smart Analysis → Smart Event Settings → Perimeter Protection .
2. Select a camera.
3. Click Intrusion.
4. Check Enable Intrusion Detection.
5. Optional: Check Save VCA Picture to save the captured intrusion detection pictures.
6. Optional: Check Enable AI by Device. The device will analyze the video, cameras only transmit
video stream.
7. Set the detection rules and detection areas.
1) Select a virtual panel. Up to 4 virtual panels are selectable.
2) Set Time Threshold, and Sensitivity.
Time Threshold
The time an object loiter in the region. When the duration of the object in the defined
detection area exceeds the threshold, the device will trigger an alarm.
Sensitivity
The size of the object that can trigger the alarm. The higher the value is, the more easily
the detection alarm will be triggered.
3) Click Draw Area.
4) Draw a quadrilateral in the preview window.
Network Video Recorder User Manual
Figure 6-12 Intrusion Detection
90