Set A Preset; Call A Preset - HIKVISION DeepinMind Series User Manual

Note
All the parameters should be exactly match the PTZ camera parameters.
4. Click OK to save the settings.

3.11.2 Set a Preset

Presets record the PTZ position and the status of zoom, focus, iris, etc.You can call a preset to
quickly move the camera to the predefined position.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view.
2. Click directional buttons to wheel the camera to a location.
3. Adjust the zoom, focus and iris status.
4. Click in the lower right corner of Live View to set the preset.
5. Select the preset No. (1 to 255) from the drop-down list.
6. Enter the preset name.
7. Click Apply to save the preset.
8. Optional: Click Cancel cancel the location information of the preset.
9. Optional: Click

3.11.3 Call a Preset

A preset enables the camera to point to a specified position such as a window when an event takes
place.
Steps
1. Click on the quick settings toolbar of the PTZ camera's Live View.
2. Click in the lower right corner of Live View to set the preset.
3. Select the preset No. from the drop-down list.
4. Click Call to call it, or click
preset to call it.
Network Video Recorder User Manual
Figure 3-11 Set Preset
in the lower right corner of Live View to view the configured presets.
Figure 3-12 View the Configured Presets
in the lower right corner of Live View, and click the configured
Figure 3-13 Call Preset (1)
31