Network Video Recorder User Manual
Figure 5-1 Event Hint Settings
3. Select an exception type.
Figure 5-2 Exceptions Handling
4. Set the linkage actions. Refer to Configure Linkage Actions .
5.2 VCA Event Alarm
The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Note
• VCA detections must be supported by the connected IP camera.
• Refer to the network camera user manual for detailed VCA detection instructions.
5.2.1 Temperature Screening
After connecting with specified thermography cameras, the device can display temperature
measurement results, and notify you with audio alert when normal or abnormal temperature is
detected.
Before You Start
Ensure your thermography camera support this function, and it is properly configured.
58