Configure Vehicle Detection - HIKVISION DeepinMind Series User Manual

6.7.1 Configure Vehicle Detection

Vehicle detection is available for road traffic monitoring. In Vehicle Detection, a passed vehicle can
be detected and the picture of its license plate can be captured. You can send an alarm signal to
notify the surveillance center and upload the captured picture to an FTP server.
Steps
1. Go to Smart Analysis → Smart Event Settings → Vehicle Detection .
2. Select a camera.
3. Click Vehicle.
4. Check Enable Vehicle Detection.
5. Optional: Check Save VCA Picture to save the captured vehicle detection pictures.
6. Configure rules, including Area Settings, Picture, Overlay Content, and Blacklist and Whitelist.
Area Settings
Up to 4 lanes are selectable.
Blacklist and Whitelist
You can export the file first to see its format, and edit it and import it to the device.
7. Click Apply.
Note
Refer to the Network Camera User Manual for detailed instructions for the vehicle detection.
8. Set the arming schedule. Refer to Configure Arming Schedule
9. Set the linkage actions. Refer to Configure Linkage Actions
Network Video Recorder User Manual
Figure 6-16 Vehicle Detection
97