Configure Linkage Actions; Configure Auto-Switch Full Screen Monitoring - HIKVISION DeepinMind Series User Manual

Network Video Recorder User Manual
Figure 5-13 Set Arming Schedule
4. You can click Copy to copy the current day arming schedule settings to other day(s).
5. Click Apply to save the settings.

5.4 Configure Linkage Actions

Alarm linkage actions will be activated when an alarm or exception occurs, including Event Hint
Display, Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Trigger Alarm
Output, and Send Email.

5.4.1 Configure Auto-Switch Full Screen Monitoring

When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel configured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must configure the auto-switch dwell time.
Note
Auto-switch will terminate once the alarm stops and back to the live view interface.
Steps
1. Go to System → Live View → General .
2. Set the event output and dwell time.
70