People Frequency Alarm - HIKVISION DeepinMind Series User Manual

8. Optional: Set Stranger Prompt. It will display the prompt in live view Target Detection (Facial
Detection) when comparison failed.
Stranger Prompt
It will display the prompt in live view Target Detection (with Facial Detection checked) when
face picture comparison failed.
Enable Alarm Output Pulse
It is usually linked with a gate. When a person is passing a gate, if the comparison succeeded,
it will trigger a pulse to open the gate. The pulse is between 100 to 900 ms. You can set
Alarm Output Pulse (ms) in System → Event → Normal Event → Alarm Output .
9. Select face picture libraries and set similarity.
10. Set the arming schedule. Refer to Configure Arming Schedule .
11. Set the linkage actions. Refer to Configure Linkage Actions .
12. Optional: Configure face grading parameters. Refer to Face Grading Configuration .
13. Click Apply to save the settings.

6.3.5 People Frequency Alarm

You can only configure people frequency alarm via web browser.
Frequently Appeared Person Alarm
It will trigger alarm when a person has appeared at a high frequency.
Steps
1. Go to Configuration → Event → People Frequency → Frequently Appeared Person .
Network Video Recorder User Manual
82