alarm output and linkage actions.
Steps
1. Go to System → Event → Normal Event → Exception.
2. Optional: Enable the event hint to display it in the live view window.
1) Check Enable Event Hint.
2) Click
to select the exception type(s) to take the event hint.
3. Select an exception type.
4. Set the linkage actions. Refer to Configure Linkage Actions.
5.2 VCA Event Alarm
The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Network Video Recorder User Manual
Figure 5-1 Event Hint Settings
Figure 5-2 Exceptions Handling
70