Vca Event Alarm; Temperature Screening - HIKVISION DS-96000NI-M8 Series User Manual

Note
The combined alarm arming schedule and linkage action are the same as the selected event(s).

6.2 VCA Event Alarm

The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Note
VCA detections must be supported by the connected IP camera.
●
Refer to the network camera user manual for detailed VCA detection instructions.
●

6.2.1 Temperature Screening

After connecting to specified thermography cameras, the device can display temperature
measurement results, and notify you with audio alert when normal or abnormal temperature is
detected.
Before You Start
Ensure your thermography camera supports this function, and it is properly configured.
Network Video Recorder User Manual
Figure 6-3 Combined Alarm
53