Hdd Settings; Add Network Camera - HIKVISION DeepinMind Series User Manual

2. Select Working Mode as Net-Fault Tolerance or Multi-Address Mode.
Net-Fault Tolerance
The two NIC cards use the same IP address, and you can select the main NIC to LAN1 or
LAN2. In this way, in case of one NIC card failure, the device will automatically enable the
other standby NIC card so as to ensure the normal running of the system.
Multi-Address Mode
The parameters of the two NIC cards can be configured independently. You can select LAN1
or LAN2 under Select NIC for parameter settings. Select one NIC card as the default route.
When the system connects with the extranet, the data will be forwarded through the default
route.
3. Configure other IP settings as needed.
4. Click Apply.
Note
• Check Enable DHCP to obtain IP settings automatically if a DHCP server is available on the
network.
• Valid MTU value range is 500 to 9676.

1.3 HDD Settings

Ensure the video recorder storage media is well. You can install at least one HDD and initialize it, or
create a RAID and initialize it.

1.4 Add Network Camera

Before you can get live video or record the video files, you must add the network cameras to the
connection list of the device.
Network Video Recorder User Manual
Figure 1-8 TCP/IP Settings
7