Vca Event Alarm; Temperature Screening; Object Thrown From Building - HIKVISION DS-8600NXI-I8/S Series User Manual

5.2 VCA Event Alarm

The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Note
● VCA detections must be supported by the connected IP camera.
● Refer to the network camera user manual for detailed VCA detection instructions.

5.2.1 Temperature Screening

After specified thermography cameras are connected, the device can display temperature
measurement results, and notify you with audio alert when normal or abnormal temperature is
detected.
Before You Start
Ensure your thermography camera supports this function, and it is properly configured.
Steps
1. Go to System → Event → Smart Event.
2. Select the optical channel of thermography camera.
3. Click Face Capture.
4. Optional: Check Save VCA Picture to save the captured pictures of face detection.
5. Set the arming schedule. Refer to Configure Arming Schedule.
6. Set linkage actions. Refer to Configure Linkage Actions. If you require to implement linkage
actions only when the thermography camera detects abnormal temperature, check Abnormal
Body Temperature in Rule Settings.
Note
The abnormal temperature is detected and defined by the thermography camera.
7. Click Apply.
What to do next
● You can check
● You can go to File Management → Smart Search → Search by Appearance to search detection
results.

5.2.2 Object Thrown from Building

This function can identify the event of throwing objects from building and identify the real target.
Before You Start
Ensure your camera supports this function.
Network Video Recorder User Manual
of Target in live view to view detection results.
76