Table of Contents
Advertisement
3. Select Adding Method as Manual.
Plug-and-Play
The camera is physically connected to the PoE interface. Its parameters cannot be edited.
You can go to System → Network → TCP/IP to change IP address of PoE port.
Manual
Add IP camera without physical connection via network.
4. Enter IP address, User Name, and Password.
5. Click OK.
1.4.4 Configure Customized Protocol
To connect network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.
Steps
1. Go to More Settings → Protocol .
Network Video Recorder User Manual
Figure 1-13 Edit Network Camera
12
- Quick Links:
- Default User and Ip Address
Hide quick links:
Advertisement
Table of Contents
