Removing And Installing Body Panels; Front Cover - CanyCom MASAO CMX227 Operator's Manual

5

Removing and Installing Body Panels

• Cut or pinch hazard exists when removing or installing the body panels; beware
of the sharp edges and pinch points.
• Make certain to reinstall the panels after removing for repairs or inspection.

Front Cover

Latch
5347M-0401-041E
5347M-0401-110E
Front Cover
5332M-0401-140E
Maintenance
1.
Front Cover
Knob Bolts
2.
NOTE
• A tool box is provided under the front
3.
Clip
4.
NOTE
• Make sure not to catch the front cover with
Rod
-54-
Remove the knob bolts (2 places).
Pull the top side of the front cover to unlock
the latch.
Pull up the front cover.
cover. Use this tool box to store tools or
replacement cutting blades.
Raise the steering wheel to the maximum
angle and fit the clip on the back of the front
cover to the rod.
Fit the upper part of the front cover.
the plate on both sides when installing the
front cover. If caught, it breaks the front
cover.