CanyCom MASAO CMX227 Operator's Manual page 91

Hose Connection
5335M-0510-010E
6. Move the mower clutch lever to [ON] to run the mower to clean.
7. When cleaning is done, move the mower clutch lever to [OFF] to stop the mower.
8. Move the cutting height adjust lever to [150] for CMX227 and CM226.
9. Turn the throttle lever to [
10. Stop the machine and remove the hose.
NOTE
• Do not set the cutting height too low. The cutting blades can hit the ground.
Maintenance
1. Park the machine.
2. Set the cutting height to about 50mm.
3. Connect a hose to the hose connection.
Run water through the hose.
4. Start the engine.
5. Turn the throttle lever to [
the engine speed.
] (slow) to lower the engine speed.
-83-
5
] (fast) to raise