Ras Information Area - Toshiba 2000 V Series Manual

Integrated controller module
Hide thumbs Also See for 2000 V Series:
Table of Contents

Advertisement

Chapter 4 Operating Procedures for the DN611 (Software)
4.2.2

RAS information area

4
58
This area shows the DN611's module status and status of communication with the
network and slave devices. Don't write data in this area. Otherwise, there is a possibility
of being unable to read the correct data. The addresses in Figure 4-10 are word
addresses as viewed from the S controller.
0107H
0108H
0109H
010AH
010BH
Input/output data setting information (384 words)
028BH
0293H
0297H
029BH
029CH
029DH
029EH
029FH
02BFH
02C6H
02C7H
02C8H
02CDH
02CEH
Figure 4-10 RAS Information Area Configuration
Network power unit yes/no (1 word)
Operation mode in case of busoff (1 word)
Network communication rate (1 word)
Local station node address (1 word)
Reserved (8 words)
Bit strobe no-response device (4 words)
Polling no-response device (4 words)
Number of polling devices (1 word)
Number of bit strobe devices (1 word)
Number of on-line devices (1 word)
Total number of devices (1 word)
Configuration information (32 words)
Node error counter (7 words)
Completion of module initialization (1 word)
Reserved (1 word)
Polling/Bit strobe scan cycle (5 words)
Down information (1 word)
Station status (1 word)
model 2000 DeviceNet Module Manual (DN611/DN611A)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Devicenet dn611Devicenet dn611a

Table of Contents