Toshiba 2000 V Series Manual page 151

Module Status Code
70 (46H)
72 (48H)
73 (49H)
75 (4BH)
76 (4CH)
77 (4DH)
78 (4EH)
79(4FH)
80(50H)
81(51H)
82(52H)
83(53H)
84(54H)
85(55H)
91(5BH)
92(5CH)
6F8C0845
Table 6-9 7-Segment LED Status Codes
DN611 detects an error in duplicate node address check.
DN611 cannot communicate with slave devices.
Vendor ID, product type, and product code of a slave device differ
from those on the DN611 scan list.
No slave device exists on the network. No slave device is registered
on the scan list.
DN611 has detected communication timeout due to no response
from slave devices.
Slave device transmission size differs from that on the DN611 scan
list.
DN611 unable to start transmission to slave devices.
DN611 unable to send to slave devices.
DN611's communication port is in idle mode.
DN611's communication port is in fault mode.
Send/receive data fragment error
Slave device initialization refused.
Slave device initialization not completed.
DN611 receive buffer overflow
DN611 busoff
DN611 network power error
6.3 RAS Information Read Data
Description
6
129