Inverter Lamp/Inverter Board Removal - Epson Perfection 1200U Service Manual

EPSON Perfection1200

4.2.4 Inverter Lamp/Inverter Board Removal

1. Release the carriage lock. (see Section 4.2.1)
2. Remove the document cover. (see Section 4.2.2)
3. Remove the upper cover. (see Section 4.2.3)
4. Remove 2 black screws (CCP, M3x8) on the carriage unit.
5. Remove the carriage unit upper cover by lifting it up and pulling it front by
the (-) screw driver.
Disassembly and Assembly
Figure 4-7. Disassembly of the Carriage Unit (1)
Figure 4-8. Disassembly of the Carriage Unit (2)
Disassembly Procedures
CCP (M3x8)
Revision B
37