EPSON Perfection1200
5. Remove one metal part and 3 screws. (When you remove one of the
screws, push the release lever to the arrowed direction.
Remove3
screws
Remove these 6 gears.
Figure 7-26. Removing gears
6. Remove 6 gears. One of the gear is fixing the hook to the PF roller shaft.
7. Remove 4 screws (gold, P-tite). When you removing one screw located
next to the release lever, push the release lever to the arrowed direction.
After removing screws, remove the black plastic frame.
Appendix
Remove this
metal part.
ADF: Disassembly
Remove 2
screws
Remove 2
screws
Figure 7-27. Removing the plastic frame
Revision B
Remove this
screw after
moving this lever
Remove this black
plastic frame after
removing screws
83