Removal Of Tpu Inverter Board - Epson Perfection 1670 Photo Service Manual

EPSON Perfection 1670 Photo/Perfection 1270

2.2.8 Removal of TPU Inverter Board

1. Remove the TPU Unit. (Refer to 2.2.1)
2. Slide the Housing Mat to the front to remove it from the sockets of the TPU Unit, and
remove the Housing Mat.
3. Remove the six screws (four (CBP M3x8), two (CBB M3x12)) shown in Figure 2-27
that are securing the TPU Inverter Unit, and remove the TPU Inverter Unit.
DISASSEMBLY/ASSEMBLY
Sockets
TPU Inverter Unit
Disassembly Procedure
Housing Mat
Figure 2-26. Removal of Housing Mat
Tightening torque 6-8kgfcm
CBP (M3x8)
Tightening torque 6-8kgfcm
Figure 2-27. Removal of TPU Inverter Unit
Revision B
Sockets
CBB (M3x12)
26