Overview; Cleaning; Lubrication - Epson Perfection 1200U Service Manual

EPSON Perfection1200

6.1 Overview

This chapter provides information necessary to keep the scanner function in
optimum condition constantly and to prevent troubles.

6.1.1 Cleaning

Perform cleaning when stain is noticeable. Stain on the document glass,
particularly, has direct effect on the scanned image. Therefore, be sure to
clean the glass well to remove stain thoroughly.
Never apply any organic solvent such as thiner and
benzine, since there may damage deteriorate plastic and
rubber parts.

Outer Cases
Wipe stain off with a clean cloth which is moisted with water and then
squeezed tightly. To remove sever stain, use neutral detergent.

Document Glass
Remove dust and paper debris with a dry clean cloth. If stain is severe or
foreign object is stuck, use a cloth absorbed with neutral detergent. If trace
is left, wipe it off well with a dry, clean cloth again.

6.1.2 Lubrication

When the carriage unit needs to be replaced, or the operation sound of the
carriage movement becomes noisy, it is necessary to apply lubrication.
Following tables show the recommended grease type and lubrication points.
Table 6-1. Recommended Grease
Type Name
Grease G-26
NOTE: "E" means exclusive product for EPSON. (Not available on the
market)
Maintenance
Supply
Quantity Part No. Specification
40g B702600001 E*
Table 6-2. Lubrication Points
Figure
6-1 Transmission Gear Shaft of the CR motor and
Drive pulley shaft
6-1 Driven Pulley Shaft
Excessive lubrication may damage the mechanism part or
cause the malfunction of the operation.
G-26
Figure 6-1. Lubrication Points
Overview
Lubrication Points
G-26
Revision B
Lubrication
G-26 (1x3mm)
G-26 (1x3mm)
59