Epson Perfection 1200U Service Manual page 80

EPSON Perfection1200
7.6.2.1 Disassembly of ASF Part
1. In order to remove the cover, remove 2 screws (black, CB + washer)
located on the right and left edges of the front cover. Flip over and remove
2 screws (gold, P-tite+ washer) from the bottom, then remove the cover.
Remove 2
black screws
Figure 7-16. Removing Screws (1)
Remove 2 screws
Figure 7-17. Removing the screws (2)
Appendix
2. Remove 4 screws (gold, P-tite + washer), and remove Motor/ Solenoid
Assembly.
Since one of the screws** is used as a stopper at the
slide gear part, be careful when removing the screw
because all gears will jump out.
(See figure7-19 on the next page)
Figure 7-18. Removing Motor/Solenoid Assembly
ADF: Disassembly
Revision B
80