Inverter Lamp/Inverter Board Removal - Epson GT-7000 Service Manual

EPSON GT-7000

4.2.4 Inverter Lamp/Inverter Board Removal

1. Release the carriage lock. (see Section 4.2.1)
2. Remove the document cover. (see Section 4.2.2)
3. Remove the upper cover. (see Section 4.2.3)
4. Remove 2 black screws(CCP,3x8) on the carriage unit.
5. Remove the carriage unit upper cover by lifting it up by screw driver.
Rev. A
Chapter 4 Disassembly and Assembly
C C P ( M 3 x 8 )
Figure 4-8. Disassembly of the Carriage Unit (1)
Figure 4-9. Disassembly of the Carriage Unit (2)
33