Circontrol Wallbox eNext User Manual page 32

Wallbox eNext User Manual
Bluetooth password
The password can be restored to factory value performing a factory reset as described
below.
1234
Factory reset
It performs a reset of the Charge Point settings to factory values. This action makes
the system reboot with all parameters changed to factory values.
Factory reset can also be performed by a physical button. For further information,
please refer to chapter "10 - Factory reset".
30
In the 'Bluetooth password' menu, the user
can see the current password of the Charge
Point and change it. The password shall be a
four alphanumeric characters code.
The settings that will be reset are the following:
• Communication settings
• Password access
• Time schedule
• Power supply current limit
• BeON configuration
• Identification method