Hicharger' App - Charger Options; B Identification Method; C Time Schedule - Circontrol Wallbox eNext User Manual

'HiCharger' App -
Charger Options
B
Identification method
Plug&Charge: The Charge Point will start
and finish the charge transaction without
the need of user identification. For further
information refer to Chapter "4 - How to use
it? - Plug&Charge".
Presence recognition: User identification
by proximity using the 'HiCharge' App and
Bluetooth. For further information refer
to Chapter "5 - How to use it? - Presence
recognition".
C
Time schedule
The maximum current that the Charge Point is allowed to deliver at every time can be
adjusted in hour intervals.
1. Enable/ disable time schedule
2. Tap on the desired hour intervals to select
them (one by one or multiple selection). Edit
the maximum current to be supplied at the
selected period of time by tapping on
Supplied current can be set between 6 A - 32 A
3. By tapping on
supplied by the Charge Point is set to 0 A, so
charges will be disabled at that periods.
All the hours of the schedule can be selected
by tapping on .
, the current to be
25