G Stop Charging - Circontrol Wallbox eNext User Manual

G
Stop charging
To finish the charge transaction, stop the charge through the 'HiCharger' App (see
Section "D - Management options" in Chapter 7) or stop the charge through the Vehicle.
Once the charge transaction is stopped, the user will be able to un-plug the connector.
Once the connector is un-plugged, the LED beacon turns
back to green in a fade-in/fade-out effect, indicating that
Presence recognition is being detected and that a new charge
transaction can be started.
If the Charge Point is available but it is not detecting Presence
recognition, the LED beacon will be fixed green.
The behaviour described is for a Charge Point set with
i Presence Recognition identification method. This work
flow could be different depending on the Charge Point
settings.
17