ELECTRO FREEZE SOFT SERVE TWIST SL500 Operator's Manual page 32

8.1 Sanitizing
Figure 8-2
184599
(continued)
Selector (Toggle)
Switch Positions
ELECTRO FREEZE Soft Serve Model SL500
7. When the cylinder has filled with
sanitizing solution, turn the selector
switch to the "CLEAN" position (figure 8-
2) and allow the beater to run for 5 minutes.
During this time period, check for leaks
around the head, plunger and drain tube.
8. Place an empty container under the
dispensing head and drain the sanitizing
solution by opening the plunger to allow
cylinder and hopper to empty. Open and
close the plunger at least 10 times during
draining to sanitize the port area of dispense
head.
9. When the sanitizing solution has
drained from the freezer, turn the selec-
tor switch to the "OFF" position.
23