ELECTRO FREEZE SOFT SERVE TWIST SL500 Operator's Manual page 19

ELECTRO FREEZE Soft Serve Model SL500
4 Part Names and Functions
Figure 4-3
10
Mix Feed Tube Assembly
The following descriptions refer to figure 4-3. The number preceding the part name corre-
sponds to the number in the figure.
1 TUBE - MIX FEED.
Meters the correct amount of mix
and air into the freezing cylinder
from the hopper.
2 REGULATOR.
Provides adjustment on mix feed
rate and a positive shut-off of mix
flow to the freezing cylinder.
3 O-RING - TUBE.
Seals the opening between the
hopper and mix feed tube. (O-ring
does not need lubrication.)
(continued)
184599