Part Names And Functions - ELECTRO FREEZE SOFT SERVE TWIST SL500 Operator's Manual

ELECTRO FREEZE Soft Serve Model SL500
4

Part Names and Functions

Figure 4-1
The following descriptions refer to figure 4-1. The number preceding the part name corre-
sponds to the number in the figure.
1 HEAD - DISPENSE
2 O-RINGS - HEAD
3 PLUNGERS - DISPENSE - SIDE
4 O-RINGS - PLUNGER
5 PLUNGER - DISPENSE - CENTER
8
Head Assembly
Encloses the freezing cylinder and
provides an opening for product to be
dispensed.
Seals the head to the freezing
cylinder. Must be lubricated.
Seals the product opening in the head
when closed. Allows product to flow
when open.
Seals the plunger in the head. Must be
lubricated to seal and slide freely.
Seals the product opening in the head
when closed. Combines ice cream
from both cylinders to form swirl
cones.
6 ROD - PLUNGER
Starts the freezer when dispensing.
Must be in place for proper
operation.
7 PIN - HANDLE
Secures handle to the head.
8 KNOB - HAND
Secures the head to the freezing
cylinder.
9 HANDLE - DISPENSE - SIDE
Opens and closes the plunger to
start and stop the flow of product
from the freezer.
10 HANDLE - DISPENSING - CENTER
Opens and closes the plunger to
start and stop the flow of swirl
product from the freezer.
11 NOZZLE - SERRATED
Forms the frozen product as it is
dispensed.
184599