Electrical Connections - ELECTRO FREEZE SOFT SERVE TWIST SL500 Operator's Manual

ELECTRO FREEZE Soft Serve Model SL500
2.4

Electrical Connections

Check the data plate for proper fuse size,
wire ampacity, and electrical specifications.
vided for proper power connections.
SL500 are made in the junction box located
mid-level behind the front panel.
permissible. Copper wires are required for
connection to freezer. All materials and
connections must conform to local codes
and/or the National Electrical Code.
shaft rotation must be clockwise as viewed
from the front of the freezer.
4
CAUTION
To prevent accidental
electrical shock, a positive
earth ground is required.
1. Freezer requires one power supply.
2. Refer to the wiring diagram pro-
3. Electrical connections for model
4. Use a flexible connection when
5. For all 3 phase freezers, beater
184599