Sabrina
3.
MACHINE IDENTIFICATION
3.1 Make and model designation
The machine and model ID information
is found on the unit's NAMEPLATE and in
the provided EC DECLARATION OF CON-
FORMITY.
3.2 General description
The machine described in this Manual
consists of mechanical, electrical, and
electronic components which, when used
together, produce milk, coffee and wa-
ter-based beverages.
This product is manufactured in compli-
ance with the EU Directives, Regulations
and Standards indicated in the EC DECLA-
RATION OF CONFORMITY provided with the
machine.
This machine is designed and con-
structed to operate only after being prop-
erly connected to a hydraulic and electrical
network and placed so as to be sheltered
from atmospheric agents.
3.3 Customer service
CMA MACCHINE PER CAFFÈ S.r.l.
Via Condotti Bardini, 1 - 31058 SUSEGANA (TV) - ITALY
Tel. +39.0438.6615 - Fax +39.0438.60657
Email: info@astoria.com - Website: www.astoria.com
10
72
of
3.4 Intended use
The espresso coffee machine has been
designed for the professional preparation
of hot drinks such as teas, cappuccinos and
weak, strong and espresso coffee, etc.
The appliance is not intended for do-
mestic use, it is intended for professional
purposes only.
The machine can be used under all the
conditions set forth, contained or described
in this document; any other conditions must
be considered dangerous.
The machine must be installed in a place
where its access is restricted to qualified
personnel only who have received suitable
training (coffee shops, restaurants, etc.).
TECHNICIANS manual