Astoria SABRINA SAE DISPLAY Use And Maintenance Manual page 40

Sabrina
WARNING LIGHT
The dispensing flow is too slow
The dispensing flow is within the tolerance
parameters
The dispensing flow is too fast
By setting the "FLOW" mode, the machine will only check the
coffee dose buttons. The flow of the "STOP/PROG" button, if used
for dispensing, will not be checked.
8.1.11 Setting the number of active groups
This item lets you set the number of active groups
that have been installed on the machine, as well as the
serial number:
Press the
No. of active groups
No. of active groups
Active groups
Serial number
Set the number of groups installed on the machine.
40 72
of
DESCRIPTION
button;
Serial number
Press the serial number button to open the screen
where the new number can be entered.
Enter the machine's serial number using the numbers
on the touchscreen. If you enter an incorrect number, you
can use the (del) button to delete the last digit.
After the number has been entered, press (ok) to
confirm and return to the previous screen.
Press the (canc) button to return to the previous
screen without making any changes.
The machine's serial number can only be programmed by a
technician. The serial number can be reprogrammed at a later date.
8.1.12 Group wash
This item enables the automatic group wash:
Press the
Force wash
Proceed as indicated in paragraphs 9.7.5 on page
56 and 9.7.6 on page 56.
button;
TECHNICIANS manual