Installation And Operating Spaces; Support Base - Astoria SABRINA SAE DISPLAY Use And Maintenance Manual

Sabrina

Installation and operating spaces

6.4
Before the machine arrives, a suitable environment
must be prepared:
A location suited to the intended use with adequate
space to comfortably use the machine;
Adequate lighting which conforms with current
standards;
An earthing system which is compliant with current
standards;
An electrical system which conforms with current
standards.
24 72
of

Support base

6.5
To ensure a sufficient degree of ergonomics and ma-
chine safety, a support base with the following features
must be made available (reference drawings on the next
page):
Ensure that there is sufficient space for the machine
to be positioned and used correctly;
The worktop (1) must be practical and able to with-
stand the machine's weight, and must be approx. 90
cm high (17);
The base must be perfectly level and have no irregu-
larities;
The terminals for connecting to the water mains (11)
and electrical mains (8) must be in the immediate
vicinity of the support base;
If the machine is positioned next to a wall, ensure that
there is a gap of at least 20 cm between the machine
and the wall (3);
Fit a drawer under the worktop (15) which will be
used to deposit used coffee grounds and if possible,
fit a rubber support as well (16) to knock the filter
holder against.
Place the motor pump in an area that is close to
the support base, protected from moisture and far
enough away that it cannot be accidentally touched
by the operator.
In order to work properly and ensure safety, the machine must
rest on a perfectly horizontal surface.
Any machine alignment adjustments must be done by adjusting
the feet (7).
If the machine is installed in moving environments (trains, ships,
etc.), special anchor pins must be used on the support base, which
are available from the manufacturer.
TECHNICIANS manual