Storage; Overview; Machine Storage; Installation - Astoria SABRINA SAE DISPLAY Use And Maintenance Manual

5.

STORAGE

Overview

5.1
In the waiting period prior to installation, the machine
must be stored by the Manufacturer or an Authorised
Distributor.

Machine storage

5.2
If storing the machine or the machine has not been
used for a certain period of time, store it in the following
conditions:
Unplug the machine from the water and power mains;
Empty all the internal circuits of water.
Store the machine taking the following precautions:
Store in a closed environment;
Protect it from shocks and stresses;
Avoid contact with corrosive substances.
The machine was designed and built to operate in
environments with the following characteristics:
Room temperature:
Max. relative humidity:
Any variation in these characteristics may decrease
the average life of some of the machine's components.
Typical examples:
Room temperature: premature degrading of the
motors.
Relative humidity: premature degrading of seals and
electronics.
If the environmental features are significantly different from
those listed, contact the MANUFACTURER before they become a
source of problems.
After storage, and before starting up the machine, it is necessary
to fully inspect the equipment.
TECHNICIANS manual
+5°C - +40°C
50% (at 40°C)
6.

INSTALLATION

Safety precautions

6.1
Carefully read the instructions provided in chapter 2 on page 7.
When all of the installation operations have not been carried out
by a Qualified Technician, use of the machine may result in serious
damage to the appliance and people.
If any work is carried out on the machine electronics when
the machine is still live, any guarantee will automatically be
invalidated.

PPE features

6.2
When installing the machine, the following PPE is
required:
The use of protective gloves is mandatory
The use of eye protection is mandatory
The use of safety shoes is mandatory

Environmental conditions

6.3
6.3.1 Room temperature
The electrical and electronic equipment installed on
the machine, has been designed and made to function
properly in environments where the temperature is be-
tween +5°C and +40°C.
6.3.2 Relative humidity
The electrical and electronic equipment installed on
the machine, has been designed and made to function
properly in environments where the relative humidity
does not exceed 50% at a temperature of 40°C, or 90%
at a temperature of 20°C.
Sabrina
23 72
of