Astoria SABRINA SAE DISPLAY Use And Maintenance Manual page 39

8.1.9 Setting the language
To set the language shown on the display, proceed
as follows:
Press the
Language
Language
English English
German Spanish
Select the language to use.
8.1.10 Dispensing check
To set the type of dispensing check, proceed as fol-
lows:
Press the
Dispensing mode
Dispensing mode
Off
Flow
Select the mode you would like to appear on the
screen while the coffee is being dispensed:
Off:
By setting "Off", the machine doesn't perform any
checks whilst the machine is dispensing.
TECHNICIANS manual
button;
French
Portuguese
button;
Timer
Timer:
During the dispensing process, the display will start
scanning the time (in seconds) group by group.
Temperature:
During the dispensing process, the temperature of
the water inside the dispensing groups that are been
used is displayed.
Group 1
Flow:
When the coffee doses were last programmed, the
system memorised the water flow during the dispensing
process.
If the "flow mode" is activated, the dispenses are
controlled by the system and are considered valid when
the dispensing speed falls within the set tolerance. If the
dispensing speed is too fast or too slow, the system will
display a message suggesting that the fineness of the
coffee grind is increased or decreased (see the table).
Sabrina
39 72
of