Astoria SABRINA SAE DISPLAY Use And Maintenance Manual page 20

Sabrina
3.11.19 Steam nozzle
The steam nozzle is connected to the top of the
heating unit. Adjust the dispensing setting by turning
the knob on the front of the machine.
3.11.20 Cappuccino maker (optional)
The cappuccino maker can be installed as an optional
extra directly onto the tap. This device can both heat and
froth the milk. To adjust and clean the cappuccino maker,
follow the instructions in the user manual.
Using the appropriate fitting, attach the cappuccino
maker directly to the steam nozzle, by replacing the
original sprayer. Otherwise, attach it via the appropriate
hose, directly onto the machine's steam valve.
Ensure that the sealing gasket (1) is present and if
so, use Teflon tape in order to prevent any steam loss
which could negatively effect the cappuccino maker's
operation.
Insert the milk suction hose (3) into the cappuccino
maker's appropriate coupling (2).
To change the temperature of the milk, attach the
reducers as shown in the table below.
2
3
20 72
of
1
Table of temperatures with and without reducers
(temperatures measured in a pre-heated cup)
Milk Not using a
temperature reducer
16°C room
55 - 60°C
temperature
6°C chilled milk 48 - 56°C
With a WHITE With a RED
reducer that reducer that
has a 1.9 mm has a 1.8 mm
diameter diameter
60 - 68°C 68 - 75°C
58 - 63°C 63 - 70°C
TECHNICIANS manual