Astoria SABRINA SAE DISPLAY Use And Maintenance Manual page 36

Sabrina
8.1.4 Steam wand option
To enable or disable the steam wand and adjust its
temperature, proceed as follows:
Press the
Steam wand
Steam wand
Setpoint T1
Setpoint T2
If enabled, you can set the desired temperature (50
to 80°C) for each button of the Steam wand push button
panel:
T1 T2
You will similarly be able to calibrate the steam wand,
which allows the difference between the value read on
000003
the display and the real temperature to be adjusted.
000000
000000
36 72
of
button;
---
000002
000000
000000
8.1.5 Water softener regeneration
To automatically display the message indicating that
the softener needs to be regenerated, proceed as follows:
Press the
Filter Regeneration
Filter regeneration
Litres used
Litre threshold
Set the number of litres used by the machine after
which the message indicating that the softener should
be regenerated will be shown
Litres used:
How many litres of water have been used since the
last reset.
Litre threshold:
How many litres of water can be consumed before
the softener regeneration message appears.
After the regeneration has been performed, set the
litres to "000000" in order to cancel the warning as fol-
lows:
Press the reset button (
In the next screen answer "Yes";
The "Litres used" counter is reset to 0, and the "Filter
Regeneration" message will disappear from the main
screen.
Reset counters.
Are you sure?
Yes
button;
);
No
TECHNICIANS manual