Access Control System
Note:
2.1.2 Stand-By
After being activated, the device enters stand-by mode. Face toward the screen to
activate face verification and display the live-view image.
If the man is in the database and the face recognition score reaches the standard, it
will show verification succeeded and display the man's name at the bottom of the
screen.
If the man is out of the database, it will show verification failed.
2.2 Login
After logging into the device, user can perform operations such as personnel management,
access control configuration, event search and etc.
To ensure the safety of device on internet, it is strongly recommended that you
set a strong password composed of at least 2 kinds of the following, numbers,
upper-case letters, lower-case letters or specific symbols with length of 8 to 16
characters.
Please modify the password periodically such as once every 3 months. If the
device is used in highly risky environment, suggest modifying the password
monthly or weekly.
Please keep your username and password safe.
Interface
Picture 2-3 Stand-by interface
User Manual