Access Protocol - Kedacom KSCA120 Series User Manual

Access Control System
3.3.1.2
3.3.2

Access Protocol

3.3.2.1
Port
On the interface of Port, configure HTTP Port, HTTPS Port, RTSP Port and
Multicast Port. When logging in through network, configure corresponding
ports by request.
Picture 3-18 Port

HTTP Port: Hypertext Transport Protocol Port. When login through
browser, you need to add a port number behind camera IP address. For
example, if HTTP port is edited as 83, when you login through browser,
you need to input "http://camera IP address:83. The number is 80 by
default, ranging 1 ~ 65535.

HTTPS Port: Hypertext Transport Protocol Secure Port based on SSL.
When login through browser, you need to add a port number behind
camera IP address. For example, if HTTPS port is edited as 5555, when
you login through browser, you need to input "http://camera IP
address:5555. The number is 5544 by default, ranging 1 ~ 65535.

RTSP Port: Real Time Streaming Protocol Port. Make sure that the port
you are editing is available. RTSP port number is 554 by default, ranging
1 ~ 65535. When login by RTSP port, rtsp://camera IP address/id=0 (id=0
play main stream, id=1 play secondary stream).

Multicast Port: Configure multicast port up to actual request, 61000 by
default, ranging 1 ~ 65535.
VSIP
The web client supports accessing to back-end platform through VSIP protocol.
Configuration steps:
User Manual