Table of Contents
Advertisement
Access Control System
3.3.2.2
3.3.2.3
ONVIF
Picture 3-20 ONVIF
Basic: ONVIF protocol is enabled by default. User can register camera to
ONVIF-supported VMS, VMS port being 80 by default. The camera will
generate "Server Address (URL)" automatically.
Authentication: Set authentication method for ONVIF login. When selecting
"N/A", user can login freely; when selecting "WS-Usernamer token", user
needs to verify username and password before login.
GB28181 (SIP)
On GB28181 interface, add the camera to GB platform according to the
requirements of GB/T28181. Configuration steps:
User Manual
Advertisement
Table of Contents
