Kedacom KSCA120 Series User Manual page 41

Access Control System
After activating the camera and modifying its network parameters, the camera will
reboot automatically. After rebooting, select either of the following methods to login:
 Select the device from IPCSearch and click "Login" or double-click the line
which the device is in to enter the web client. Input username and the password
set during activation and click "Login".

Input camera IP address in the browser to enter the login interface. Input
username and the password set during activation and click "Login".
After login successfully for the first time, download and install the plug-in according to the
prompts. Close the browser when installing the plug-in. After finishing, re-login and enter
the following interface.
Note: Suggest using IE Kernel browser, otherwise it might affect some functions of
the web client.
Picture 3-6 Web Client Login Interface
Picture 3-7 Web Client Interface
User Manual