Osd - Kedacom KSCA120 Series User Manual

Access Control System
3.4.2

OSD

On OSD interface, you can configure OSD text on the surveillance window. Configuration
steps are as follows:
Select options in "Content" according to requirements and preview the effect in the
1)
window below, options including "Time", "Label", "Alarm", "PTZ" and "OSD";
Click "Advanced" to set "Format", "Font" and "Margin". In the part of format, you can
2)
set "Time Format", "Display time in 2 lines" and "Alarm in front of tag"; in the part of
font, you can set font "Type", "Size" and "Color"; in the part of margin, you can adjust
the distance between OSD and border both horizontal and vertical;
3) Edit OSD texts: double click the OSD textbox and input characters in the popup
interface. Click "OK". Each OSD can be set maximum 32 characters and so is the
label;
4) Edit OSD positions: drag the OSD in the window with mouse to change its position.
Each OSD can be dragged within the blue box only. If you want to drag it out of the
blue box, move the blue box first;
Load font: Click "Load" to load "Default Font", "Large Font", "Medium Font" or "Small
5)
Font". Then edit content and position according to the above steps;
Picture 3-33 OSD
User Manual