Table of Contents
Advertisement
Access Control System
3.2.2
Playback
Click "Playback" to enter the interface of recording management. User can search, view
and download video records in SD card.
Operation steps:
1)
Select recording duration from the calendar. If there is background color on a date,
it means there is recording on that day.
2)
Click "Search" and the video will be displayed directly in the timeline on the right
(the highlight parts on the timeline).
Note: Red means alarm video recordings, blue meaning scheduled video
recordings and green meaning manual video recordings.
Alarm recording: Enable video recording when an alarm event occurs such as motion
detection triggered video recording. Go to Settings > Event > Intelligent Function >
Motion Detection, and select "Recording Linkage".
Scheduled recording: Enable video recording automatically during certain durations.
Configure on the interface of Settings > Storage > Recording.
Manual recording: When the network is disconnected from VMS or NVR, video
recording will be enabled by default.
To enable this function, go to Settings > Local Setting > Play, select
"Display Status Info" and click "Save".
Video freeze, click this button and the image will freeze at the last
frame before clicking. Click again to recover image. During video
freeze, the PTZ function is disabled.
Full screen, click this button to display in full screen. Double click in
full screen or press Esc to exit.
Picture 3-14 Playback
User Manual
Advertisement
Table of Contents
